Trust in our 26+ years of water management expertise, you will be in great hands!

Save Time with the Aqua-Barrier’s Quick Installation

Construction is generally a rather slow-moving job. With a line of crews waiting to work on each section of the project and a looming deadline for completion, it proves to be demanding work. Any way to save time is welcome.

Fortunately, jobs that involve dewatering have a massive advantage for saving time: the Aqua-Barrier. This inflatable temporary cofferdam is a quick, easy way to clear the worksite in a matter of hours and let work begin almost immediately. Let’s take a look at what an inflatable dam could do for your project.

[bctt tweet=”Construction often demands time that the crew doesn’t have. Use an Aqua-Barrier to reclaim some of that time and meet your deadlines. #aquabarrier” username=”HSIServicesInc”]

Installing a Conventional Cofferdam

A conventional cofferdam, typically made of concrete or steel, requires a good amount of work and care. First, the wall itself is installed in the proper place to establish the border of the worksite. Next, huge pumps remove the water from the site, allowing the crew to enter and begin the project. The most obvious problem with this set-up is the time involved in constructing a secure wall, then dewatering afterward. This process could take an entire day, potentially more if the worksite is especially large. And when the job is done, what will you do with the materials? They aren’t exactly reusable.

Installing an Aqua-Barrier

By contrast, an Aqua-Barrier requires significantly less time and effort to set up. Simply determine the border of the worksite, unroll the barrier, and inflate it. Best of all, you can combine the dewatering process with the initial setup since the barrier fills full of water! Just put the displaced water into your cofferdam. Though the exact time required to inflate the cofferdam varies, an 8ft x 100ft Aqua-Barrier takes a mere 2 hours to fully inflate.

Save Time on Future Projects

Not only is an Aqua-Barrier the superior choice for your immediate needs, but it’s also a great way to save time on your future construction projects. If you opt for a conventional cofferdam, you’ll have to safely dispose of the building materials afterward since you’ll likely be unable to reuse or recycle them. This also means you’ll need to start from scratch the next time you need a cofferdam. Fortunately, an Aqua-Barrier is fully reusable!

Pro Tip: Some water barrier materials, such as sandbags, have to be treated as hazardous waste. Avoid this environmental hazard and time waster by using an Aqua-Barrier instead!

Streamline Your Next Dewatering & Construction Job

While you can’t control everything that might contribute to a delay in your construction work, you can certainly control the amount of time you spend dewatering your worksite. An Aqua-Barrier can turn a days-long dewatering job into mere hours. Add one of these essential inflatable barriers to your construction equipment and save time with the quick Aqua-Barrier installation!

Connect with us for more tips and tricks on optimizing your construction work.

Please give us a call at 936-372-1222 or toll-free at 800-245-0199 to get started.

Verified by MonsterInsights